Coil Nail manufacturers introduced to us, according to the working air pressure, 

can be divided into low-pressure Coil Nail Gun and high-pressure Coil Nail Gun.

Generally in the production of Wooden Pallet, Wooden Pallet, etc., only need ordinary volume Nail Gun, that is,

low-pressure volume Nail Gun, its working pressure in 4-8kg, the use of ordinary volume nail such as FS64V5, FC70W3, etc.;

And the use of high pressure Nail Gun air pressure is usually more than 10kg, the use of special plastic nail, 

can hit cement blocks, thin iron, etc..

Usually, we should pay attention to the maintenance of the Nail Gun, in order to better use.

Pallet nail gun work because the firing pin to do piston movement in the cylinder, so must often add lubricating oil, to reduce the wear of parts.

Because the Nail Gun needs to be powered by compressed air, and the air contains a lot of water, so an oil-water separator device should be connected between the air compressor and the nail gun to play the role of dehumidification, so as to avoid too much water inside the nail gun, resulting in the swelling failure of the rubber ring due to immersion.